|
|
CT8030
Dual
Display Professional Automotive Digital Multimeter
(Version française disponible bientôt)
CT8030 Main Features
- State of the Art ergonomic design
and styling for easier handling and use
- Full autorange features
- Large
selectable 4¾ or 3¾ digit main display
- 4 digits secondary
display
- 42 segments analog bargraph
- DC Voltage measurement up to
1000 Volt
- DC Voltage measurement up to
750 Volt
- AC/DC Current measurement up
to 10 A
- Tachometer function
with inductive pickup measures from 30 to 20000 rpm
- Dwell measurement
in degrees from 0 to 360º or duty cycle from
0 to 100%
- Temperature measurement from
-20ºC to
1000ºC or 0º to
1832ºF (selectable ºC or ºF)
- Resistance
measurement up to 40 MOhm
- Frequency measurement
from 10 to 20 KHz
- Fuel Injection test measures
pulse width from 0.05 to 250 mS, or duty cycle from 0 to 100% Oxygen
Sensor test function
- Alternator test function
- Fault
Code Reader
- DTC Decoder
- Diode test
- Continuity Test
- Overload protection
- Soft holster
for instrument protection
- Auto power off
|
CT8025 Applications
- Measure engine RPM, ignition
dwell angle, and temperature of exhaust manifold, cooling system,
air conditioning, heating system, catalytic
converter, etc.
- Measure output in sensors like
Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold
Air, Pressure (MAP),
Manifold Air Flow (MAF),
etc.
- Check grounds, Voltage drops
and continuity across Connectors, Wires, Cables, Relays Contacts,
Lamps, Switches, etc.
- Check components like Alternator,
Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires,
Magnetic Pick-ups,
Motors, Switches,
Fuses, etc.
- An essential tool for all around
troubleshooting of electrical and electronic circuit and systems.
|
Ergonomic Features:
- The smaller and ergonomic profile
compared with previous models makes handling and operation easier
and more convenient
- Single knob selects function
and range
- Rugged plastic enclosure
- Soft anti-slip rubber holster
protects the instrument against impacts and chemicals
- Large easy
to read 1/2" (12.5 mm) digits display
- Design allows comfortable
hand holding or resting at convenient places horizontally or
at an angle by using the stand at the back
of the
holster
| For use in:
- Electronic and electrical circuits
- Automobiles
- Trucks
- Trailers
- Boats
- RVs
- All 0 to 600 Volt AC/ DC
powered circuits
|
Technical Specifications :
General Specifications:
- Display:
- 4¾ digits main display
- 4 digits secondary display
- 42 Segments analog bargraph
(20 updates/Second)
Backlight
- Automatic( - ) negative
polarity indicator
- Automatic Zeroing
- Automatic
over-range indication
- Low battery indicator
- Power Source: One
standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
- Physical dimensions (including holster) :6.30” (H)
x 3.22” (W) x 1.89” (D) - 160 mm x 82 mm x 48 mm
- Weight: Approximately
12.14 Oz ( 345 g) Including battery
- Electrical
Specifications:
- DC Voltage: 0
to ± 1000V, ±0.3% ± 2
dgts., 10MO input impedance
- AC Voltage: 0 to 750V, ±2.5% ± 5
dgts., 10MO input impedance, 50 to 500 Hz
- DC Current: 0
to ± 10A, ± 0.8 % ± 4 dgts.,
- AC Current: 0
to 10A, ± 0.8 % ± 4 dgts.
- Resistance: 0
to 40 MO ± 0.8% ± 5 dgts.,
- Frequency: 0
to 20 KHz, ± 0.01 % ± 2 dgts.
- Tachometer: 30
to 20000 RPM, ± 2 RPM
- Dwell: 0
to 360º, ± 1.2°/ krpm/cyl + 2d
- Fuel Injector (pulse width): 0.05
to 250 mS, ± 0.05 mS +1d
- Oxygen Test: Measures
cross count up to 10/Second
- Alternator Test: Measures
output voltage ripple, beeps if ripple exceeds 0.45V
- Fault code reader: Retrieves
blink type fault codes
- DTC Decoder: Retrieves
Impulse Code Diagnostic Trouble Codes
- Diode test: 2.4 ± 0.6 mA test current, 3.2 V max. test voltage
- Continuity Test: Audible
indicator (Buzzer) with circuit resistance is below 100
Ohm
- Temperature: -20º to 1000°C or 0°F to 1832°F (±2%
+ 1 dgts.)
|
Accessories Included:
- Battery: 9 Volt alkaline battery included
- Test probes: One
red and one black, 1000V/10A rated (IEC1010/EN61010 CAT II), 35½" long
- Temperature probe: Bead
type K thermocouple
- Inductive Pickup for
tachometer function
- Hard Storage/Carrying Case: Polypropylene foam
padded case
- Soft protective holster
- User Manual
|